The Professional Choice for Heavy-Duty Cat7 Infrastructure
Standard RJ45 connectors are often the “weak link” when installing high-performance Category 7 networks. Because Cat7 cables (especially S/FTP 22AWG) are significantly thicker due to their individual pair shielding and heavy outer jackets, standard 1.1mm plugs simply won’t fit. Our Cat7 Shielded RJ45 Connector with 1.5mm Ultra-Large Wire Hole is the ultimate answer. It allows the thick-insulated wires to glide into position without stripping the internal foil, preserving the cable’s structural integrity and electrical performance while supporting a matching boot for ultimate durability.
Advanced Gold-Plated Copper Shielding Technology
In environments saturated with electromagnetic interference—such as industrial plants or dense data centers—shielding is non-negotiable. While most competitors use nickel-plated iron, our connector features a Gold-Plated Copper Shell. Copper is a vastly superior electrical conductor for grounding, and the deep gold plating ensures that the shield will never oxidize or corrode. This creates an impenetrable “Faraday Cage” around the connection point, ensuring your 10Gbps data stream remains pure and uninterrupted by external noise.
Technical Specifications (Mobile-Optimized Table)
| Feature | Specification Details |
| Product Model | HX-C7-GPC-15-B |
| Category Rating | Cat7 (Category 7) / Cat8 Compatible |
| Shielding Type | STP / S-FTP (Full Metal Shielded) |
| Shell Material | Pure Copper with Deep Gold Plating |
| Wire Hole Size | 1.5mm (Ultra-Large Entry) |
| Structure | Two-Piece (Main Body + Load Bar) |
| Boot Support | Compatible with Large-OD Strain Relief Boots |
| Contact Plating | 50μ” Gold over Nickel |
| Wire Gauge Support | 22AWG – 23AWG Solid/Stranded |
| Max Data Rate | 10 Gbps (10,000 Mbps) |
| Bandwidth Rate | Up to 600 MHz |
The Two-Piece Advantage: Precision and Accuracy
The inclusion of a Load Bar (Liner) is critical for Cat7 cables. It holds the wires in a staggered 4-up/4-down pattern before they enter the plug body, maintaining the cable’s internal twists as close to the contacts as possible. This two-piece design allows the technician to pre-arrange the wires into the correct T568A or T568B sequence outside the connector body. Once trimmed, the assembly slides into the housing, ensuring every wire is fully seated against the pins, which is mandatory for passing high-level Fluke tests.
Enhanced Strain Relief with Matching Boots
To provide a complete professional solution, this Cat7 Shielded RJ45 Connector is designed to work seamlessly with specialized strain relief boots. These boots protect the critical locking tab from snagging and breaking during cable pulls. More importantly, when used with thick 22AWG cables, the boot provides a firm mechanical transition between the connector and the cable jacket, preventing internal wire fatigue and ensuring the shielding connection remains intact even under physical stress.
Engineered for 10GBASE-T and PoE++
Modern networks require more than just speed; they require power. Our connector is fully compatible with Power over Ethernet (PoE, PoE+, and PoE++ 802.3bt). The combination of 50μ” thick gold-plated phosphor bronze pins and the high-conductivity copper shell ensures minimal contact resistance. This prevents localized heat buildup, protecting your high-end networking hardware—such as 10G switches, Wi-Fi 7 access points, and advanced medical imaging equipment.
Professional Installation Tip
For the most reliable termination, use a high-quality shielded crimping tool. Ensure that the cable’s drain wire is securely wrapped and makes firm contact with the gold-plated copper shell. Before crimping, slide the matching boot onto the cable to ensure a clean, snag-proof finish once the termination is complete.
CALL NOW
